Brake Caliper Press

Brake Caliper Press

Brake Caliper Press

Brake Caliper Press can provide us with the best and easiest help.
The process of brake caliper operation is simultaneous. When braking is required, the hydraulic piston extends from the caliper pivot. The piston’s movement presses the brake liner’s friction material against the metal surface of the rotor. When the brakes are replaced, the pistons must retract back to make extra room for the rotor. But not all brake caliper retract. The rear caliper may sometimes be required to retract the piston clockwise or counterclockwise. This is the time to use Brake Caliper Press.
The brake caliper press is equipped with two sets of push plates in two sizes: 7.01 x 2.36 inches and 4.53 x 2.71 inches. Single, double, and four side piston brakes work.
With four-piston calipers, most large trucks and commercial vehicles, when brake calipers pressure back is easy, can rotate 360 degrees, therefore positioning any position.
The extended rod retracts from 1.88 inches to 3.03 inches.

For more information about quality brake calipers, or find Tylolcar Brake

TYLOLCAR