Q:

What is the electronic parking function?

A:

Electronic parking (electronic handbrake), which replaces the traditional mechanical handbrake, can be through the electronic button to achieve the parking and release of the vehicle.

Electronic handbrake button function

Electronic handbrake (EPB) : it replaces the traditional mechanical handbrake, through the electronic button to achieve the vehicle parking and release function

Pull up switch parking: pull up the electronic parking switch in the static state of the vehicle, manual parking is completed, the indicator light is on.Once the EPB is enabled, the red electronic parking brake indicator on the instrument will light up

Press the switch to release: the vehicle is in the parking state, in the power or start state, press the brake pedal, at the same time press the electronic parking switch, EPB release, the switch indicator light off

The parking button also has these functions:

Long pull off and reclamp function: when the car is stopped automatically, pull off for 3 seconds upward, and the parking system will stop the car again with the maximum clamping force for emergency braking: when the car is running at a speed of more than 5km/h, the long pull off (more than 3 seconds) can be used for emergency braking (note: used in case of driving braking failure)

Several cases of automatic parking

1. Automatic parking with P gear (applicable to automatic transmission models) :

When the vehicle is at rest, switch from any gear to P gear and the vehicle will be parked automatically. At this time, the red indicator light of the automatic parking button will be on

2. Automatic parking with open door:

When the vehicle is in a stationary state, open the main driving door, the vehicle will be parked automatically, at this time the automatic parking button red indicator light

3. Automatic parking:

When the vehicle is in a stationary state, the vehicle will be parked automatically after it is turned off by pressing the start button. At this time, the red light of the automatic parking button will be on

4, slope again clip:

After parking on a ramp, if a ramp occurs, the system will park again with maximum clamping force to prevent the ramp.(the electronic parking system will adopt different parking forces according to the gradient.)

Automatic parking button function

AUTO HOLD function: when the AUTO HOLD switch is pressed to meet certain driving conditions, the AUTO HOLD function can be realized without manual parking

Automatic parking:

Press the AUTO HOLD button to turn the function on and the indicator light turns green.However, the automatic parking function can only be activated if the following three conditions are met:

1. The vehicle is in the electrified state

2. The main driving door is closed

3. Put on your seat belt

Activation of automatic parking function:

When the automatic parking function is turned on and the vehicle is running at a speed of more than 2km/h, the vehicle will be parked automatically after the brake is pressed to make the vehicle stop, and the brake will be released after about 1 second

Specific operation method:

Automatic transmission model: after the stop, keep the brake for more than 1 second, then release, will automatically park;(park in D or neutral)

Manual transmission model: when driving, press down the clutch pedal and brake pedal, put the gear into neutral, lift the clutch (brake pedal to keep more than 1 second before release), the vehicle will automatically park

How to turn off auto parking:

Case 1: when AUTO parking is open, press the AUTO HOLD button again to exit the AUTO parking function, and the indicator light will go out.(if you re-fasten your seat belt and close the main door, the function will be restored. The indicator light will be on.)

AUTO HOLD also has these features:

Parking: when the AUTOHOLD is open and the vehicle is stationary, the vehicle will automatically park when the main seat belt is unfastened

Memory function: if AUTO HOLD is in the open state when the vehicle is powered off last time, the last state will be remembered when the vehicle is powered on next time, and AUTO HOLD function will be enabled by default

Automatic release after parking

When the vehicle starts and is in the parking state, the automatic parking release operation can be completed by:

Manual transmission model: close the door, fasten the seat belt and press the clutch, put the gear into forward gear or reverse gear, slowly lift the clutch and gently press the accelerator pedal, the vehicle can automatically release the parking

Automatic transmission model: close the door, fasten the seat belt, gear into forward or reverse, tap the accelerator pedal, the vehicle can automatically release parking

Please note:

1. When starting on the ramp, parking braking force will be different due to the different slope, so the throttle depth required for automatic parking release is also different (appropriately increase the throttle depth on the ramp).

2. When the motor is released automatically, the motor sound will be transmitted from the rear of the vehicle due to the motor working, which is a normal phenomenon